10Gb/s SFP+ 1550nm Duplex 40Km Transceiver, The SFP+ transceivers are high performance, cost effective modules supporting multi data-rate of 10Gbps and 40Km transmission distance with SMF.
10Gb/s SFP+ 1550nm Duplex 40Km Transceiver
The transceivers are compatible with SFP+ Multi-Source Agreement (MSA) ，For further information, please refer to SFP+ MSA.
Products Features
Up to 10Gb/s data links
EML transmitter and PIN photo-detector
Up to 40Km transmission on SMF
Hot-pluggable SFP+ footprint
Duplex LC/UPC type pluggable optical interface
Low power dissipation
Metal enclosure, for lower EMI
RoHS compliant and lead-free
Single +3.3V power supply
Support Digital Diagnostic Monitoring interface
Compliant with SFF-8472
Case operating temperature
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Applications
10GBASE-ER/EW Ethernet
40km 10G Fiber channel
SONET OC-192/SDH STM-64
Pin Description.
| Pin | Symbol | Name/Description | NOTE |
| 1 | VEET | Module transmitter ground | 1 |
| 2 | Fault | Module transmitter Fault | 2 |
| 3 | Disable | Transmitter Disable; Turns off transmitter laser output | 3 |
| 4 | SDL | 2 wire serial interface data input/output (SDA) | 4 |
| 5 | SCL | 2 wire serial interface clock input (SCL) | 4 |
| 6 | MOD-ABS | Module Absent, connect to VeeR or VeeT in the module | 2 |
| 7 | RS0 | Rate select0: module inputs and are pulled low to VeeT with >30 kΩ resistors in the module. | |
| 8 | LOS | Receiver Loss of Signal Indication | |
| 9 | RS1 | Rate select1: module inputs and are pulled low to VeeT with >30 kΩ resistors in the module. | |
| 10 | VeeR | Module receiver ground | 1 |
| 11 | VeeR | Module receiver ground | 1 |
| 12 | RD- | Receiver inverted data out put | |
| 13 | RD+ | Receiver non-inverted data out put | |
| 14 | VeeR | Module receiver ground | 1 |
| 15 | VccR | Module receiver 3.3V supply | |
| 16 | VccT | Module transmitter 3.3V supply | |
| 17 | VeeT | Module transmitter ground | 1 |
| 18 | TD+ | Transmitter non-inverted data out put | |
| 19 | TD- | Transmitter inverted data out put | |
| 20 | VeeT | Module transmitter ground | 1 |
Notes:
1. The module ground pins shall be isolated from the module case.
2. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board.
3. This pin shall be pulled up with 4.7K-10Kohms to VccT in the module.
4. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board.
Quality Certification
NO.4007,Peanut U Gu Creative Park , No.57 GuangDa Rd,LongGang Zone, Shenzhen city, China.
Copyright @ 2025 Shenzhen Sinda Optic Technology Co.,ltd All Rights Reserved.
Network Supported
Sitemap | Blog | Xml | Privacy Policy
English
español
العربية
Kiri Shigawara
